DIY Tutorial- Installing Round Furniture Legs on Your Existing Furniture

  • By:jumidata
  • Date:2024-06-06

DIY Tutorial: Upgrading Your Furniture with Round Legs

Looking to revitalize your existing furniture without breaking the bank? Installing round furniture legs is a quick and affordable way to give any piece a fresh and modern look. Whether you’re working with a sofa, armchair, or dresser, this DIY tutorial will provide you with the step-by-step instructions you need to complete the project successfully.

Tools and Materials

Before getting started, gather the following tools and materials:

Pencil or marking tool

Measuring tape

Drill with drill bit

Countersink bit

Screw gun

1-1/4-inch wood screws

Round furniture legs

Wood glue

Measuring and Marking

1. Measure the height you want to add to the furniture. Mark this measurement on the bottom of each leg.

2. Position the legs on the corners of the furniture, aligning them with the marked height.

3. Use a pencil to lightly mark the center of each leg on the furniture.

Drilling Pilot Holes

1. Attach the countersink bit to the drill and drill a pilot hole at each marked center point. The pilot hole should be about 1/2-inch deep.

2. Remove the countersink bit and attach the regular drill bit. Drill pilot holes all the way through the furniture, using the same drill depth as before.

Installing the Legs

1. Apply wood glue to the top of each leg.

2. Align the legs with the pilot holes and carefully insert the screws using the screw gun.

3. Tighten the screws securely until the legs are firmly attached to the furniture.

Finishing Touches

1. Wipe away any excess wood glue with a damp cloth.

2. Inspect the legs for any gaps or wobbles. If necessary, adjust the screws or add additional wood glue to secure the legs further.

3. Enjoy your newly upgraded furniture with its stylish round legs!

Tips for Success

Choose legs that are appropriate for the weight of the furniture.

If the furniture is heavy, use longer screws or consider reinforcing the legs with metal brackets.

For a more secure fit, countersink the screws slightly below the surface of the furniture.

If you are working with a delicate piece of furniture, test the drill bit on a scrap piece of wood first to avoid damaging the finish.

Don’t be afraid to experiment with different leg styles and colors to create a unique look for your furniture.



Kinnay Hardware Products Co., Ltd.

We are always providing our customers with reliable products and considerate services.

    If you would like to keep touch with us directly, please go to contact us


      Online Service