How to Paint and Refinish Metal Legs on Leisure Chairs

Leisure chairs are a great way to relax and unwind, but over time, the metal legs can become dull and rusty. If you’re looking to give your leisure chairs a new look, painting and refinishing the metal legs is a great option. Here’s a step-by-step guide on how to do it:

Materials You’ll Need

Metal cleaner

Sandpaper

Primer

Paint

Clear coat

Paintbrush or spray gun

Gloves

Safety glasses

Step 1: Clean the Metal Legs

The first step is to clean the metal legs to remove any dirt, grease, or rust. Use a metal cleaner and a scrub brush to clean the legs thoroughly. Rinse the legs with water and let them dry completely.

Step 2: Sand the Metal Legs

Once the legs are clean, sand them with sandpaper to remove any remaining rust or imperfections. Start with a coarse-grit sandpaper and then move to a finer-grit sandpaper. Sand the legs until they are smooth to the touch.

Step 3: Prime the Metal Legs

Priming the metal legs will help the paint to adhere better. Apply a thin coat of primer to the legs and let it dry completely.

Step 4: Paint the Metal Legs

Once the primer is dry, you can start painting the metal legs. You can use a paintbrush or a spray gun to apply the paint. Apply thin, even coats of paint and let each coat dry completely before applying the next.

Step 5: Apply a Clear Coat

Once the paint is dry, apply a clear coat to protect the paint from scratches and wear. Apply thin, even coats of clear coat and let each coat dry completely before applying the next.

Step 6: Reassemble the Leisure Chairs

Once the metal legs are dry, you can reassemble the leisure chairs. Attach the legs to the seats and enjoy your newly refinished chairs!

Tips

If the metal legs are badly rusted, you may need to use a rust remover before priming and painting.

You can use any type of paint to paint the metal legs, but a high-quality paint will last longer.

If you are using a spray gun to paint the metal legs, be sure to wear a respirator to protect yourself from the fumes.

Let the paint and clear coat dry completely before using the chairs to ensure that the finish is durable.