How to Adjust and Maintain Your Gaming Chair Swivel Base

Gaming chairs are a must-have for any serious gamer. They provide comfort, support, and style. One of the most important parts of a gaming chair is the swivel base. The swivel base allows you to rotate the chair 360 degrees, making it easy to get in and out of the chair and to move around your desk.

However, over time, the swivel base can become loose or damaged. This can make the chair unstable and uncomfortable. If your gaming chair swivel base is not working properly, there are a few things you can do to adjust and maintain it.

Adjusting the Swivel Base

The first step is to adjust the swivel base. This is usually done by tightening or loosening the bolts that connect the base to the chair. If the bolts are too tight, the base will be difficult to swivel. If the bolts are too loose, the base will be unstable.

To adjust the bolts, you will need a wrench or a screwdriver. First, loosen the bolts slightly. Then, turn the chair upside down and tighten the bolts until they are snug. Be careful not to overtighten the bolts, as this can damage the base.

Lubricating the Swivel Base

Once the swivel base is adjusted, you should lubricate it. This will help to keep the base moving smoothly and prevent it from becoming damaged. To lubricate the base, you will need a silicone-based lubricant.

Apply a small amount of lubricant to the base and then wipe it off with a clean cloth. Be careful not to use too much lubricant, as this can attract dirt and dust.

Tightening the Screws

Over time, the screws that hold the swivel base in place can become loose. This can cause the base to wobble or even come loose. To tighten the screws, you will need a screwdriver.

First, remove the screws from the base. Then, apply a small amount of threadlocker to the screws. Threadlocker is a type of glue that helps to keep screws in place.

Once you have applied the threadlocker, reinsert the screws into the base. Tighten the screws until they are snug. Be careful not to overtighten the screws, as this can damage the base.

Replacing the Swivel Base

If the swivel base is damaged beyond repair, you may need to replace it. To replace the swivel base, you will need to purchase a new base that is compatible with your gaming chair.

Once you have purchased a new base, follow these steps to replace it:

– First, remove the old base from the chair.

– Then, attach the new base to the chair.

– Finally, adjust the swivel base and lubricate it.

By following these steps, you can adjust and maintain your gaming chair swivel base and keep it working properly for years to come.