DIY Makeover- Adding Metal Legs to Your Dresser

Elevate Your Abode with a Touch of Industrial Chic

Is your dresser looking a little drab and dated? Don’t despair, for a simple DIY makeover can breathe new life into this essential piece. By adding sleek metal legs, you can transform your ordinary dresser into a modern masterpiece with an industrial edge.

Materials Required:

Dresser with removable legs

4 metal legs (approximately 12-16 inches high)

Screws

Screwdriver or electric drill

Level

Optional: Paint or stain for the legs

Step-by-Step Guide:

1. Remove Existing Legs:

Place the dresser on its side and remove the existing legs. If they are not removable, you can cut them off with a saw.

2. Level the Dresser:

Place the dresser on a level surface and use a level to ensure that it is both horizontally and vertically level.

3. Mark Leg Positions:

Determine the desired location for the metal legs and mark their positions using a pencil.

Use a level to ensure that the legs will be evenly spaced and vertical.

4. Attach Metal Legs:

Hold the metal leg in place and align it with the marked position.

Drive a screw into the hole in the leg and into the dresser.

Repeat for the remaining three legs.

5. Secure Legs:

Use additional screws to secure the legs in place and stabilize the dresser. Make sure the screws are tightened securely.

Optional: Paint or Stain Legs

If desired, you can paint or stain the metal legs to match the decor of your room. Allow the paint or stain to dry thoroughly before using the dresser.

Conclusion:

Voilà! With just a few simple steps and a touch of DIY prowess, you have successfully transformed your dresser into a stylish and functional work of art. The addition of metal legs has given it a modern and industrial flair that will elevate the aesthetic of any room. So, embrace your inner interior designer and give your dresser a makeover today!